Virkon Aquatic Disinfectant 10kg

Routine surface disinfection, tools and equipment, and footdips and vehicle tyre dips are all 1:100, which is 10 grams of Virkon Aquatic to every litre of fresh water. Boats and vehicles are 1:200, or 5 grams per litre.

Surfaces are treated at 300 millilitres of made-up solution per square metre, to the point of run-off, so multiply your area in square metres by 0.3 to get the litres of solution required.

At 1:100 you need 10 grams per litre, so a 10 kg pack makes 1,000 litres of solution and covers roughly 3,300 square metres at the 300 mL per square metre rate.

Yes. It has been applied continuously into a hatchery header tank at 2 ppm, a 1:500,000 dilution, from the first feeding for at least eight weeks, made up from a 1:100 stock solution.

Safety testing showed tolerance at three times the recommended 2 ppm application rate. Always follow the registered label directions for the species you are treating.

Virkon Aquatic is developed for aquaculture biosecurity and is supplied here as a 10 kg pack, code 203270. Virkon S is the broad spectrum veterinary disinfectant for livestock disease prevention and control, sold as tablets and 1 kg and 5 kg packs.

Yes. Use Biosolve E to clean thoroughly before disinfecting with Virkon Aquatic.