Bio-Mesh Bio-Block

Tubular biofilter media modules for trickling filters and submerged biofilters.

Product Information

Key Features

  • Fixed-bed tubular biomedia module in two tube diameters — 55 mm at 200 m²/m³ and 42 mm at 250 m²/m³
  • Rough-surfaced tubes give more area for biomass to build on and hold onto
  • Supplied as a finished 550 mm cube module — no on-site assembly, and it lifts straight into an existing tank
  • Manufactured in Australia from HDPE, and both chemically and biologically inert
  • High voidage — 60% for the 55 mm and 55% for the 42 mm — keeps head loss and blockage risk low
  • Suits trickling filters, aerated and submerged aerobic or anaerobic beds, oil separators, stormwater sumps and cooling towers
  • Long-term, low-maintenance media with no consumables — a one-off investment rather than a running cost
  • Choosing your tube size and module count: the 42 mm tube packs 250 m²/m³ and is the choice where surface area per cubic metre matters most; the 55 mm tube gives 200 m²/m³ but a higher 82% hollow space, so it suits dirtier water where blockage is the bigger risk. Each standard module holds about 33 m² (55 mm) or 41 m² (42 mm) of surface area, so divide the area your daily ammonia load needs by that figure to get the module count. Send us your flow, ammonia load and tank dimensions and we will confirm it.

Specifications

SpecificationBio-Mesh Tubing 55 mmBio-Mesh Tubing 42 mm
Specific surface area (approx)200 m²/m³250 m²/m³
Area basis (total or protected)Not stated by supplierNot stated by supplier
Average voidage60%55%
Average hollow space82%70%
MaterialHDPEHDPE
Standard module size550 × 550 × 550 mm (10 × 10 tubes)546 × 546 × 550 mm (13 × 13 tubes)
Surface area per standard moduleApprox 33 m² (0.166 m³ at 200 m²/m³)Approx 41 m² (0.164 m³ at 250 m²/m³)
Tube surface finishRough, for increased surface area and biomass holdRough, for increased surface area and biomass hold
Indicative TAN removalNo rate, temperature or TAN concentration is given. Contact us for details.No rate, temperature or TAN concentration is given. Contact us for details.
Chemical and biological reactivityInertInert
On-site assemblyNone required — supplied as a finished moduleNone required — supplied as a finished module
Country of manufactureAustraliaAustralia
Options stocked55 mm Rough42 mm Rough

Frequently Asked Questions

Spare Parts & Consumables

No products were found matching your selection.

Related Products

Have a question or need a custom solution?

Our team is here to help you find the right equipment for your project.