UV Sizing Guide.

To accurately size your UV you will need the following information:

  • Flow rate
  • Target dosage

Often you will not know your target dosage, so we advise a standard dose of 30mj/cm². This dose is high enough to control bacteria and algae. The higher dose of 280mj/cm² is used to control white spot, this is a common aquarium parasite that hobbyists try to target.

Please refer to the table below to appropriately size your unit:

ModelLamps/WattsConnectionUV Dimensions
(Length x Diameter)
General Aquarium
Volume (L)
Standard Dose
(30mJ/cm²)
LPM
White Spot Dose
(280mJ/cm²)
LPM
EU18-U1 x 18W40mm59cm x 10cm100 - 300L22N/A
EU25-U1 x 25W40mm74cm x 10cm250 - 500L35N/A
EU401 x 40W40mm112cm x 10cm500 - 1,000L587.6
E50S1 x 50W50mm76cm x 15cm800 - 1,500L9710
E80S1 x 80W50mm114cm x 15cm1,500 - 2,200L17018
E120S1 x 120W50mm145cm x 15cm2,200 - 4,700L24225
E150S-2301 x 150W50mm180cm x 15cm3,500 - 7,500L38740
2502402 x 120W (240W)80mm158cm x 15cm4,500 - 8,200L41645
2503002 x 150W (300W)80mm193cm x 15cm6,500 - 13,000L65870