Colorite Aero-Tube

Multiply 37 LPM per metre by your tube length, or divide your total required air flow by 37 LPM to get the metres of tube needed.

Colorite does not publish a bubble diameter for Aero-Tube — if you need a stated fine-bubble figure, Bubbletech Oxyprax and Airprax are rated under 0.5 mm.

Aero-Tube runs at 1 PSI, so a standard low-pressure regenerative blower is enough — allow extra pressure for the water depth the tube sits under.

Lift the tube and flush it through with air or water to clear debris; there are no consumable parts to replace.

Aero-Tube is bulk tubing by the metre, the Aero-Tube Diffuser is a short pre-made weighted length with a barb fitting, and the Diffuser Grid is a pre-assembled HDPE grid holding 20 m of tube on a 50 mm slip connection.

Cut to the metre (SKU AEROPM) or as a 30 metre roll (SKU AERO30) — other lengths available on request.

Bulk tubing needs to be weighted or clamped down on site; the pre-made Aero-Tube Diffusers come already weighted with stainless steel rod.