Pentair SMART UV Sterilizer Power Supply

Match the wattage of your steriliser and its lamp — the table above lists the model each part number covers, and the wattage is printed on the vessel label.

The usual signs are a lamp that will not strike, one that flickers or one that lights but runs visibly dim — all of them mean the lamp is no longer at full UV-C output even though the system looks alive.

A remote power supply keeps the electronics out of the wet zone, which is safer around water and gives the ballast a much longer service life.

Yes — the SMART UV power supply is supplied with a 10 A plug.

No — the ballast is sized to a specific lamp power, and mismatching it will either fail to strike the lamp or run it outside its design point, so the dose you think you are getting is not the dose you get.

The 300 W model uses the 202150-ML-2 150 W ballast; the quantity per system and the part for the 240 W model are not published, so contact us and we will confirm before you order.

Prices are shown in the dropdown above; pick the part number for your model, or contact us if yours is not listed.