SENECT – Aquaculture Monitoring and Control

Monitoring and control units that track water quality in RAS, ponds and hatcheries and switch equipment automatically.

Price range: $320.00 through $3,900.00 ex GST

Product Information

Key Features

  • Five control units covering 1 to 6 sensor inputs and up to 6 output relays, so the same platform suits a single tank or a whole RAS hall
  • Measures dissolved oxygen (with temperature), pH, ORP, conductivity and temperature — the sensors are ordered separately from the control unit
  • Output relays switch real plant: oxygen dosing, aeration, feeders, lights and pumps, driven from the measured value against a set point
  • Built-in WiFi (WLAN) on every unit — no data cabling to run between the tank and the office
  • SENECT Control App on phone, tablet, PC and Mac shows live readings and relay status, and pushes alarm messages when a parameter goes out of range
  • Several units join into one software system, so multiple tanks or buildings are managed from a single app
  • Senect Monitor 4 is the monitoring-only unit — four sensors and alarms, no relay control
  • Choose on three things: which parameters you need to measure, how many probes that adds up to, and how many devices you need to switch. Match the sensor count to the unit’s sensor inputs and the switched devices to its output relays, then order each probe as a separate line — no control unit ships with a sensor.

Specifications

ItemSensor inputsOutput relaysNotes
Senect One13Control unit only, sensor ordered separately — code 1000
Senect Two22Control unit only, sensors ordered separately — code 1600
Senect Monitor 44NoneMonitoring and alarms only, no relay control — code 1100SN
Senect Basic33Control unit only, sensors ordered separately — code 1400SN
Senect Pro66Control unit only, sensors ordered separately — code 1500SN
Optical DO sensor (includes temperature)——Sold separately — code 2100-PP
pH sensor——Sold separately — code 2200
ORP sensor——Sold separately — code 2300
Conductivity sensor——Sold separately — code 2400
Temperature sensor——Sold separately — code 2500
Sensor measuring ranges, resolution and accuracy——Not published by supplier on this page — see the spec sheets below or ask us for the figures for the probe you need
Connectivity——Built-in WiFi (WLAN) module on every control unit
Network support——WEP and WPA / WPA2 Personal; WPA Enterprise is not supported
Remote access outside the local network——Requires IPv4, port forwarding and dynamic DNS
Software——SENECT Control App for smartphone, tablet, PC and Apple — live readings, relay status, push alarms
Multi-unit operation——Several control units can be joined into one software system

Frequently Asked Questions

Spare Parts & Consumables

No products were found matching your selection.

Related Products

Have a question or need a custom solution?

Our team is here to help you find the right equipment for your project.